www.onrope.com.au
 
 
www.onrope.com.au

NEW PRODUCTS
ANCHORS/BOLT PLATES
ARBORIST EQUIPMENT
ASCENDERS
BELAY PLATES
BUCKLES (METAL)
DESCENDERS
EDGE/ROPE PROTECTION
ENERGY ABSORBING LANYARDS
EQUIPMENT BAGS
FALL ARREST DEVICES
FIGURE OF 8
FOOTLOOPS
FRAMES
GIBBS PRODUCTS
GLOVES
HAULING KITS
HARNESSES
HELMETS
KARABINERS
LADDERS
LANYARDS
LOAD CELL
PULLEYS
PULLEY - SRTE Static (Fixed)
QUICK LINKS
RESCUE HAULING KITS
RESCUE KNIVES & MULTITOOLS
RIGGING PLATES
ROOF SAFTEY KITS
ROPE
SLINGS
STRECHERS - CHAIR
SWIVELS
WEBBING/TAPE

Home | Contact Us | Search

Current Category
DESCENDERS > SRTE - GOLDTAILS


SRTE - GOLDTAILS

SRTE Goldtails are primarily used for descending, however an increasing number of Emergency Service Personnel are using them in Hauling Systems for belaying while the sporting users are using tube tape to rappel on, in canyons, etc, as 100m of tube tape is lighter to carry than 100m of 9mm rope. SRTE Goldtails can use single or double rope up to 13mm.Friction on the SRTE Goldtails is controlled by winding the rope through the appropriate number of slots. Friction can be varied while rappelling by increasing or decreasing the number of slots the rope goes through. For added protection all slots have gates to prevent the rope from coming out accidentally. The wide rounded bars enable operators to wrap the rope 360° around them, alternatively 25mm Tubular Webbing may be used. The SRTE Goldtail incorporates massive heat sink, any heat generated from descending is channelled away from the bars and dispersed into the spine - ideal for extra long descents.




GTR5
GTR5
RESCUE Goldtail - suits 9-13mm rope (5 hole)





GTR
GTR
RESCUE Goldtail - suits 9-13mm rope (4 hole)





GT16
GT16
16mm Goldtail - suits 9-16mm rope (3 hole)